The USB data logger can be used to store large amounts of data on a USB Stick (Millions of records). The logger is connected via the RS485 port to a LID608, LID650 or LID665 decoder. All ID numbers transmitted by the decoder are read by the data logger, date/time stamped and stored on the USB stick. The Unit address and the baud rate of the data logger can be set by using DIP switches.
The datalogger has LED indications for power, Rx & Tx communication and for Storage active (becomes active when a USB stick is inserted).
A pushbutton to savely remove the USB stick is located next to the USB stick.
The logger is recognized by the PC software of the LID650/LID665. Date and time are set via this software. Each day the logger creates automatically a file (CSV format).
Also there are 2 inputs available. One analogue for monitoring for example the battery voltage. Second input is a digital input that can be programmed to meet special customer requirements.
All applications that require to store a large amount of data.
|Supply Voltage||7-12Volt dc|
|Memory capacity||Depending on size of USB Stick.(1G USB Stick will store approx. 18.000.000 codes with date & time)|
|Communication||RS485 for logging. RS232 for connecting GPRS modem.|
|Visual indication||Tx & Rx data led. Storing data, power.|
|Inputs||1 analogue input 0-24VDC, 1 digital pull-down|
|Date-time||RTC with Li-battery backup.|
|Dimensions||100 x 100 x ? mm (depending on type of USB Stick)|
- DIN Rail mountable (See also image of logger in DIN Rail module)
- GPRS modem connection to send data on a webserver.
- Expension port for optional connections like Bluetooth or WiFi module
We develop and produce solutions for processing organic waste streams, air cleaning, electronic identification and animal housing.
These products are divided over three divisions:
Green Machines, Identification and Farm Systems.